Mosaic: Decentralized Borrowing Protocol
Last updated
Last updated
Mosaic is a decentralized protocol that allows REEF holders to obtain maximum liquidity against their collateral without paying interest. After locking up REEF as collateral in a smart contract and creating an individual position called a "trove", the user can get instant liquidity by minting MoUSD, a USD-pegged stablecoin. Each trove is required to be collateralized at a minimum of 110%. Any owner of MoUSD can redeem their stablecoins for the underlying collateral at any time. The redemption mechanism along with algorithmically adjusted fees guarantee a minimum stablecoin value of USD 1.
An unprecedented liquidation mechanism based on incentivized stability deposits and a redistribution cycle from riskier to safer troves provides stability at a much lower collateral ratio than current systems. Stability is maintained via economically-driven user interactions and arbitrage, rather than by active governance or monetary interventions.
The protocol has built-in incentives that encourage both early adoption and the operation of multiple front ends, enhancing decentralization.
Visit mosaicprotocol.xyz to find out more and join the discussion.
Mosaic is a collateralized debt platform. Users can lock up REEF, and issue stablecoin tokens (MoUSD) to their own Reef address, and subsequently transfer those tokens to any other Reef address. The individual collateralized debt positions are called Troves.
The stablecoin tokens are economically geared towards maintaining value of 1 MoUSD = $1 USD, due to the following properties:
The system is designed to always be over-collateralized - the dollar value of the locked Reef exceeds the dollar value of the issued stablecoins
The stablecoins are fully redeemable - users can always swap $x worth of MoUSD for $x worth of REEF (minus fees), directly with the system.
The system algorithmically controls the generation of MoUSD through a variable issuance fee.
After opening a Trove with some Reef, users may issue ("borrow") tokens such that the collateralization ratio of their Trove remains above 110%. A user with $1000 worth of REEF in a Trove can issue up to 909.09 MoUSD.
The tokens are freely exchangeable - anyone with an Ethereum address can send or receive MoUSD tokens, whether they have an open Trove or not. The tokens are burned upon repayment of a Trove's debt.
The Mosaic system regularly updates the REEF:USD price via a decentralized data feed. When a Trove falls below a minimum collateralization ratio (MCR) of 110%, it is considered under-collateralized, and is vulnerable to liquidation.
Mosaic utilizes a two-step liquidation mechanism in the following order of priority:
Offset under-collateralized Troves against the Stability Pool containing MoUSD tokens
Redistribute under-collateralized Troves to other borrowers if the Stability Pool is emptied
Mosaic primarily uses the MoUSD tokens in its Stability Pool to absorb the under-collateralized debt, i.e. to repay the liquidated borrower's liability.
Any user may deposit MoUSD tokens to the Stability Pool. This allows them to earn the collateral from the liquidated Trove. When a liquidation occurs, the liquidated debt is cancelled with the same amount of MoUSD in the Pool (which is burned as a result), and the liquidated Reef is proportionally distributed to depositors.
Stability Pool depositors can expect to earn net gains from liquidations, as in most cases, the value of the liquidated Reef will be greater than the value of the cancelled debt (since a liquidated Trove will likely have an ICR just slightly below 110%).
If the liquidated debt is higher than the amount of MoUSD in the Stability Pool, the system tries to cancel as much debt as possible with the tokens in the Stability Pool, and then redistributes the remaining liquidated collateral and debt across all active Troves.
Anyone may call the public liquidateTroves() function, which will check for under-collateralized Troves, and liquidate them. Alternatively they can call batchLiquidateTroves() with a custom list of trove addresses to attempt to liquidate.
Currently, mass liquidations performed via the above functions cost 60-65k gas per trove. Thus the system can liquidate up to a maximum of 95-105 troves in a single transaction.
The precise behavior of liquidations depends on the ICR of the Trove being liquidated and global system conditions: the total collateralization ratio (TCR) of the system, the size of the Stability Pool, etc.
Here is the liquidation logic for a single Trove in Normal Mode and Recovery Mode. SP.MoUSD represents the MoUSD in the Stability Pool.
ICR < MCR & SP.MoUSD >= trove.debt
MoUSD in the StabilityPool equal to the Trove's debt is offset with the Trove's debt. The Trove's REEF collateral is shared between depositors.
ICR < MCR & SP.MoUSD < trove.debt
The total StabilityPool MoUSD is offset with an equal amount of debt from the Trove. A fraction of the Trove's collateral (equal to the ratio of its offset debt to its entire debt) is shared between depositors. The remaining debt and collateral (minus REEF gas compensation) is redistributed to active Troves
ICR < MCR & SP.MoUSD = 0
Redistribute all debt and collateral (minus REEF gas compensation) to active Troves.
ICR >= MCR
Do nothing.
#### Liquidations in Recovery Mode: TCR < 150%
ICR <=100%
Redistribute all debt and collateral (minus REEF gas compensation) to active Troves.
100% < ICR < MCR & SP.MoUSD > trove.debt
MoUSD in the StabilityPool equal to the Trove's debt is offset with the Trove's debt. The Trove's REEF collateral (minus REEF gas compensation) is shared between depsitors.
100% < ICR < MCR & SP.MoUSD < trove.debt
The total StabilityPool MoUSD is offset with an equal amount of debt from the Trove. A fraction of the Trove's collateral (equal to the ratio of its offset debt to its entire debt) is shared between depositors. The remaining debt and collateral (minus REEF gas compensation) is redistributed to active troves
MCR <= ICR < TCR & SP.MoUSD >= trove.debt
The Pool MoUSD is offset with an equal amount of debt from the Trove. A fraction of REEF collateral with dollar value equal to 1.1 * debt is shared between depositors. Nothing is redistributed to other active Troves. Since it's ICR was > 1.1, the Trove has a collateral remainder, which is sent to the CollSurplusPool and is claimable by the borrower. The Trove is closed.
MCR <= ICR < TCR & SP.MoUSD < trove.debt
Do nothing.
ICR >= TCR
Do nothing.
Stability Pool depositors gain Reef over time, as liquidated debt is cancelled with their deposit. When they withdraw all or part of their deposited tokens, or top up their deposit, the system sends them their accumulated REEF gains.
Similarly, a Trove's accumulated gains from liquidations are automatically applied to the Trove when the owner performs any operation - e.g. adding/withdrawing collateral, or issuing/repaying MoUSD.
Any MoUSD holder (whether or not they have an active Trove) may redeem their MoUSD directly with the system. Their MoUSD is exchanged for REEF, at face value: redeeming x MoUSD tokens returns $x worth of REEF (minus a redemption fee).
When MoUSD is redeemed for REEF, the system cancels the MoUSD with debt from Troves, and the REEF is drawn from their collateral.
In order to fulfill the redemption request, Troves are redeemed from in ascending order of their collateralization ratio.
A redemption sequence of n steps will fully redeem from up to n-1 Troves, and, and partially redeems from up to 1 Trove, which is always the last Trove in the redemption sequence.
Redemptions are blocked when TCR < 110% (there is no need to restrict ICR < TCR). At that TCR redemptions would likely be unprofitable, as MoUSD is probably trading above $1 if the system has crashed that badly, but it could be a way for an attacker with a lot of MoUSD to lower the TCR even further.
Note that redemptions are disabled during the first 14 days of operation since deployment of the Mosaic protocol to protect the monetary system in its infancy.
Most redemption transactions will include a partial redemption, since the amount redeemed is unlikely to perfectly match the total debt of a series of Troves.
The partially redeemed Trove is re-inserted into the sorted list of Troves, and remains active, with reduced collateral and debt.
A Trove is defined as “fully redeemed from” when the redemption has caused (debt-200) of its debt to absorb (debt-200) MoUSD. Then, its 200 MoUSD Liquidation Reserve is cancelled with its remaining 200 debt: the Liquidation Reserve is burned from the gas address, and the 200 debt is zero’d.
Before closing, we must handle the Trove’s collateral surplus: that is, the excess REEF collateral remaining after redemption, due to its initial over-collateralization.
This collateral surplus is sent to the CollSurplusPool, and the borrower can reclaim it later. The Trove is then fully closed.
Economically, the redemption mechanism creates a hard price floor for MoUSD, ensuring that the market price stays at or near to $1 USD.
Recovery Mode kicks in when the total collateralization ratio (TCR) of the system falls below 150%.
During Recovery Mode, liquidation conditions are relaxed, and the system blocks borrower transactions that would further decrease the TCR. New MoUSD may only be issued by adjusting existing Troves in a way that improves their ICR, or by opening a new Trove with an ICR of >=150%. In general, if an existing Trove's adjustment reduces its ICR, the transaction is only executed if the resulting TCR is above 150%
Recovery Mode is structured to incentivize borrowers to behave in ways that promptly raise the TCR back above 150%, and to incentivize MoUSD holders to replenish the Stability Pool.
Economically, Recovery Mode is designed to encourage collateral top-ups and debt repayments, and also itself acts as a self-negating deterrent: the possibility of it occurring actually guides the system away from ever reaching it.
papers - Whitepaper and math papers: a proof of Mosaic's trove order invariant, and a derivation of the scalable Stability Pool staking formula
packages/dev-frontend/ - Mosaic Developer UI: a fully functional React app used for interfacing with the smart contracts during development
packages/fuzzer/ - A very simple, purpose-built tool based on Mosaic middleware for randomly interacting with the system
packages/lib-base/ - Common interfaces and classes shared by the other lib- packages
packages/lib-ethers/ - Ethers-based middleware that can read Mosaic state and send transactions
packages/lib-react/ - Components and hooks that React-based apps can use to view Mosaic contract state
packages/lib-subgraph/ - Apollo Client-based middleware backed by the Mosaic subgraph that can read Mosaic state
packages/providers/ - Subclassed Ethers providers used by the frontend
packages/subgraph/ - Subgraph for querying Mosaic state as well as historical data like transaction history
packages/contracts/ - The backend development folder, contains the Hardhat project, contracts and tests
packages/contracts/contracts/ - The core back end smart contracts written in Solidity
packages/contracts/test/ - JS test suite for the system. Tests run in Mocha/Chai
packages/contracts/tests/ - Python test suite for the system. Tests run in Brownie
packages/contracts/gasTest/ - Non-assertive tests that return gas costs for Mosaic operations under various scenarios
packages/contracts/fuzzTests/ - Echidna tests, and naive "random operation" tests
packages/contracts/migrations/ - contains Hardhat script for deploying the smart contracts to the blockchain
packages/contracts/utils/ - external Hardhat and node scripts - deployment helpers, gas calculators, etc
Backend development is done in the Hardhat framework, and allows Mosaic to be deployed on the Hardhat EVM network for fast compilation and test execution.
As of 18/01/2021, the current working branch is main. master is out of date.
The Mosaic system incorporates a secondary token, MSIC. This token entitles the holder to a share of the system revenue generated by redemption fees and issuance fees.
To earn a share of system fees, the MSIC holder must stake their MSIC in a staking contract.
Mosaic also issues MSIC to Stability Providers, in a continous time-based manner.
The MSIC contracts consist of:
MSICStaking.sol - the staking contract, containing stake and unstake functionality for MSIC holders. This contract receives REEF fees from redemptions, and MoUSD fees from new debt issuance.
CommunityIssuance.sol - This contract handles the issuance of MSIC tokens to Stability Providers as a function of time. It is controlled by the StabilityPool. Upon system launch, the CommunityIssuance automatically receives 32 million MSIC - the “community issuance” supply. The contract steadily issues these MSIC tokens to the Stability Providers over time.
MSICToken.sol - This is the MSIC ERC20 contract. It has a hard cap supply of 100 million, and during the first year, restricts transfers from the Mosaic admin address, a regular Ethereum address controlled by the project company Mosaic AG. Note that the Mosaic admin address has no extra privileges and does not retain any control over the Mosaic protocol once deployed.
Some MSIC is reserved for team members and partners, and is locked up for one year upon system launch. Additionally, some team members receive MSIC vested on a monthly basis, which during the first year, is transferred directly to their lockup contract.
In the first year after launch:
All team members and partners are unable to access their locked up MSIC tokens
The Mosaic admin address may transfer tokens only to verified lockup contracts with an unlock date at least one year after system deployment
Also, separate MSIC allocations are made at deployment to an EOA that will hold an amount of MSIC for bug bounties/hackathons and to a Uniswap LP reward contract. Aside from these allocations, the only MSIC made freely available in this first year is the MSIC that is publically issued to Stability Providers via the CommunityIssuance contract.
A LockupContractFactory is used to deploy LockupContracts in the first year. During the first year, the MSICToken checks that any transfer from the Mosaic admin address is to a valid LockupContract that is registered in and was deployed through the LockupContractFactory.
Mosaic admin deploys LockupContractFactory
Mosaic admin deploys CommunityIssuance
Mosaic admin deploys MSICStaking
Mosaic admin creates a Pool in Uniswap for MoUSD/REEF and deploys Unipool (LP rewards contract), which knows the address of the Pool
Mosaic admin deploys MSICToken, which upon deployment:
Stores the CommunityIssuance and LockupContractFactory addresses
Mints MSIC tokens to CommunityIssuance, the Mosaic admin address, the Unipool LP rewards address, and the bug bounty address
Mosaic admin sets MSICToken address in LockupContractFactory, CommunityIssuance, MSICStaking, and Unipool
Mosaic admin tells LockupContractFactory to deploy a LockupContract for each beneficiary, with an unlockTime set to exactly one year after system deployment
Mosaic admin transfers MSIC to each LockupContract, according to their entitlement
Mosaic admin deploys the Mosaic core system
Mosaic admin connects Mosaic core system internally (with setters)
Mosaic admin connects MSICStaking to Mosaic core contracts and MSICToken
Mosaic admin connects CommunityIssuance to Mosaic core contracts and MSICToken
Mosaic admin periodically transfers newly vested tokens to team & partners’ LockupContracts, as per their vesting schedules
Mosaic admin may only transfer MSIC to LockupContracts
Anyone may deploy new LockupContracts via the Factory, setting any unlockTime that is >= 1 year from system deployment
All beneficiaries may withdraw their entire entitlements
Mosaic admin address restriction on MSIC transfers is automatically lifted, and Mosaic admin may now transfer MSIC to any address
Anyone may deploy new LockupContracts via the Factory, setting any unlockTime in the future
Mosaic admin periodically transfers newly vested tokens to team & partners, directly to their individual addresses, or to a fresh lockup contract if required.
NOTE: In the final architecture, a multi-sig contract will be used to move MSIC Tokens, rather than the single Mosaic admin EOA. It will be deployed at the start of the sequence, and have its address recorded in MSICToken in step 4, and receive MSIC tokens. It will be used to move MSIC in step 7, and during & after the lockup period. The Mosaic admin EOA will only be used for deployment of contracts in steps 1-4 and 9.
The current code does not utilize a multi-sig. It implements the launch architecture outlined above.
Additionally, a LP staking contract will receive the initial LP staking reward allowance, rather than an EOA. It will be used to hold and issue MSIC to users who stake LP tokens that correspond to certain pools on DEXs.
The core Mosaic system consists of several smart contracts, which are deployable to the Ethereum blockchain.
All application logic and data is contained in these contracts - there is no need for a separate database or back end logic running on a web server. In effect, the Ethereum network is itself the Mosaic back end. As such, all balances and contract data are public.
The system has no admin key or human governance. Once deployed, it is fully automated, decentralized and no user holds any special privileges in or control over the system.
The three main contracts - BorrowerOperations.sol, TroveManager.sol and StabilityPool.sol - hold the user-facing public functions, and contain most of the internal system logic. Together they control Trove state updates and movements of Reef and MoUSD tokens around the system.
BorrowerOperations.sol - contains the basic operations by which borrowers interact with their Trove: Trove creation, REEF top-up / withdrawal, stablecoin issuance and repayment. It also sends issuance fees to the MSICStaking contract. BorrowerOperations functions call in to TroveManager, telling it to update Trove state, where necessary. BorrowerOperations functions also call in to the various Pools, telling them to move Reef/Tokens between Pools or between Pool <> user, where necessary.
TroveManager.sol - contains functionality for liquidations and redemptions. It sends redemption fees to the MSICStaking contract. Also contains the state of each Trove - i.e. a record of the Trove’s collateral and debt. TroveManager does not hold value (i.e. Reef / other tokens). TroveManager functions call in to the various Pools to tell them to move Reef/tokens between Pools, where necessary.
MosaicBase.sol - Both TroveManager and BorrowerOperations inherit from the parent contract MosaicBase, which contains global constants and some common functions.
StabilityPool.sol - contains functionality for Stability Pool operations: making deposits, and withdrawing compounded deposits and accumulated REEF and MSIC gains. Holds the MoUSD Stability Pool deposits, and the REEF gains for depositors, from liquidations.
USDMToken.sol - the stablecoin token contract, which implements the ERC20 fungible token standard in conjunction with EIP-2612 and a mechanism that blocks (accidental) transfers to addresses like the StabilityPool and address(0) that are not supposed to receive funds through direct transfers. The contract mints, burns and transfers MoUSD tokens.
SortedTroves.sol - a doubly linked list that stores addresses of Trove owners, sorted by their individual collateralization ratio (ICR). It inserts and re-inserts Troves at the correct position, based on their ICR.
PriceFeed.sol - Contains functionality for obtaining the current REEF:USD price, which the system uses for calculating collateralization ratios.
HintHelpers.sol - Helper contract, containing the read-only functionality for calculation of accurate hints to be supplied to borrower operations and redemptions.
Along with StabilityPool.sol, these contracts hold Reef and/or tokens for their respective parts of the system, and contain minimal logic:
ActivePool.sol - holds the total Reef balance and records the total stablecoin debt of the active Troves.
DefaultPool.sol - holds the total Reef balance and records the total stablecoin debt of the liquidated Troves that are pending redistribution to active Troves. If a Trove has pending ether/debt “rewards” in the DefaultPool, then they will be applied to the Trove when it next undergoes a borrower operation, a redemption, or a liquidation.
CollSurplusPool.sol - holds the REEF surplus from Troves that have been fully redeemed from as well as from Troves with an ICR > MCR that were liquidated in Recovery Mode. Sends the surplus back to the owning borrower, when told to do so by BorrowerOperations.sol.
GasPool.sol - holds the total MoUSD liquidation reserves. MoUSD is moved into the GasPool when a Trove is opened, and moved out when a Trove is liquidated or closed.
ITroveManager.sol, IPool.sol etc. These provide specification for a contract’s functions, without implementation. They are similar to interfaces in Java or C#.
Mosaic functions that require the most current REEF:USD price data fetch the price dynamically, as needed, via the core PriceFeed.sol contract using the Chainlink REEF:USD reference contract as its primary and Witnet's REEF:USD price feed as its secondary (fallback) data source. PriceFeed is stateful, i.e. it records the last good price that may come from either of the two sources based on the contract's current state.
The fallback logic distinguishes 3 different failure modes for Chainlink and 2 failure modes for Witnet:
Frozen (for both oracles): last price update more than 4 hours ago
Broken (for both oracles): response call reverted, invalid timeStamp that is either 0 or in the future, or reported price is non-positive (Chainlink) or zero (Witnet). Chainlink is considered broken if either the response for the latest round or the response for the round before the latest fails one of these conditions.
PriceChangeAboveMax (Chainlink only): higher than 50% deviation between two consecutive price updates
There is also a return condition bothOraclesLiveAndUnbrokenAndSimilarPrice which is a function returning true if both oracles are live and not broken, and the percentual difference between the two reported prices is below 5%.
The current PriceFeed.sol contract has an external fetchPrice() function that is called by core Mosaic functions which require a current REEF:USD price. fetchPrice() calls each oracle's proxy, asserts on the responses, and converts returned prices to 18 digits.
Mosaic sees a Witnet REEF-USD price that is at least 15 minutes old. This is because Witnet operates via proof-of-stake, and some dispute period is needed in which fake prices can be disputed. When a Witnet price is disputed, it is removed from the list of prices that Mosaic sees. This dispute period ensures that, given at least one responsive disputer who disputes fake REEF prices, Mosaic will never consume fake price data from Witnet.
The choice of 15 minutes for the dispute period was based on careful analysis of the impact of a delayed REEF price on a Mosaic system. We used historical REEF price data and looked at the impact of different delay lengths. 15 minutes was chosen as a sweet spot that gives plenty of time for disputers to respond to fake prices, while keeping any adverse impacts on Mosaic to a minimum.
The PriceFeed contract fetches the current price and previous price from Chainlink and changes its state (called Status) based on certain conditions.
Initial PriceFeed state: chainlinkWorking. The initial system state that is maintained as long as Chainlink is working properly, i.e. neither broken nor frozen nor exceeding the maximum price change threshold between two consecutive rounds. PriceFeed then obeys the logic found in this table:
https://docs.google.com/spreadsheets/d/18fdtTUoqgmsK3Mb6LBO-6na0oK-Y9LWBqnPCJRp5Hsg/edit?usp=sharing
The PriceFeedTestnet.sol is a mock PriceFeed for testnet and general back end testing purposes, with no oracle connection. It contains a manual price setter, setPrice(), and a getter, getPrice(), which returns the latest stored price.
The mainnet PriceFeed is tested in test/PriceFeedTest.js, using a mock Chainlink aggregator and a mock TellorMaster contract.
The purpose of the PriceFeed is to be at least as good as an immutable PriceFeed that relies purely on Witnet, while also having some resilience in case of Witnet failure / timeout, and chance of recovery.
The PriceFeed logic consists of automatic on-chain decision-making for obtaining fallback price data from Witnet
Witnet Decimals: Witnet uses 6 decimal precision for their ETHUSD price as determined by a social consensus of Witnet miners/data providers, and shown on Witnet's price feed page. Their decimals value is not offered in their on-chain contracts. We rely on the continued social consensus around 6 decimals for their ETHUSD price feed. Witnet have informed us that if there was demand for an ETHUSD price at different precision, they would simply create a new requestId, and make no attempt to alter the social consensus around the precision of the current ETHUSD requestId (1) used by Mosaic.
Mosaic relies on a particular data structure: a sorted doubly-linked list of Troves that remains ordered by individual collateralization ratio (ICR), i.e. the amount of collateral (in USD) divided by the amount of debt (in MoUSD).
This ordered list is critical for gas-efficient redemption sequences and for the liquidateTroves sequence, both of which target Troves in ascending order of ICR.
The sorted doubly-linked list is found in SortedTroves.sol.
Nodes map to active Troves in the system - the ID property is the address of a trove owner. The list accepts positional hints for efficient O(1) insertion - please see the hints section for more details.
ICRs are computed dynamically at runtime, and not stored on the node. This is because ICRs of active Troves change dynamically, when:
The REEF:USD price varies, altering the USD of the collateral of every Trove
A liquidation that redistributes collateral and debt to active Troves occurs
The list relies on the fact that a collateral and debt redistribution due to a liquidation preserves the ordering of all active Troves (though it does decrease the ICR of each active Trove above the MCR).
The fact that ordering is maintained as redistributions occur, is not immediately obvious: please see the mathematical proof which shows that this holds in Mosaic.
A node inserted based on current ICR will maintain the correct position, relative to its peers, as liquidation gains accumulate, as long as its raw collateral and debt have not changed.
Nodes also remain sorted as the REEF:USD price varies, since price fluctuations change the collateral value of each Trove by the same proportion.
Thus, nodes need only be re-inserted to the sorted list upon a Trove operation - when the owner adds or removes collateral or debt to their position.
Reef in the system lives in four Pools: the ActivePool, the DefaultPool, the StabilityPool and the CollSurplusPool, plus MSICStaking contract. When an operation is made, Reef is transferred in one of three ways:
From a user to a Pool
From a Pool to a user
From one Pool to another Pool
Reef is recorded on an individual level, but stored in aggregate in a Pool. An active Trove with collateral and debt has a struct in the TroveManager that stores its ether collateral value in a uint, but its actual Reef is in the balance of the ActivePool contract.
Likewise, the StabilityPool holds the total accumulated REEF gains from liquidations for all depositors.
MSICStaking receives REEF coming from redemption fees.
Borrower Operations
openTrove
msg.value
msg.sender->BorrowerOperations->ActivePool
addColl
msg.value
msg.sender->BorrowerOperations->ActivePool
withdrawColl
_collWithdrawal parameter
ActivePool->msg.sender
adjustTrove: adding REEF
msg.value
msg.sender->BorrowerOperations->ActivePool
adjustTrove: withdrawing REEF
_collWithdrawal parameter
ActivePool->msg.sender
closeTrove
All remaining
ActivePool->msg.sender
claimCollateral
CollSurplusPool.balance[msg.sender]
CollSurplusPool->msg.sender
Trove Manager
liquidate (offset)
collateral to be offset
ActivePool->StabilityPool
liquidate (redistribution)
collateral to be redistributed
ActivePool->DefaultPool
liquidateTroves (offset)
collateral to be offset
ActivePool->StabilityPool
liquidateTroves (redistribution)
collateral to be redistributed
ActivePool->DefaultPool
batchLiquidateTroves (offset)
collateral to be offset
ActivePool->StabilityPool
batchLiquidateTroves (redistribution).
collateral to be redistributed
ActivePool->DefaultPool
redeemCollateral
collateral to be swapped with redeemer
ActivePool->msg.sender
redeemCollateral
redemption fee
ActivePool->MSICStaking
redeemCollateral
trove's collateral surplus
ActivePool->CollSurplusPool
Stability Pool
provideToSP
depositor's accumulated REEF gain
StabilityPool -> msg.sender
withdrawFromSP
depositor's accumulated REEF gain
StabilityPool -> msg.sender
withdrawETHGainToTrove
depositor's accumulated REEF gain
StabilityPool -> BorrowerOperations -> ActivePool
MSIC Staking
stake
staker's accumulated REEF gain from system fees
MSICStaking ->msg.sender
unstake
staker's accumulated REEF gain from system fees
MSICStaking ->msg.sender
When a user issues debt from their Trove, MoUSD tokens are minted to their own address, and a debt is recorded on the Trove. Conversely, when they repay their Trove’s MoUSD debt, MoUSD is burned from their address, and the debt on their Trove is reduced.
Redemptions burn MoUSD from the redeemer’s balance, and reduce the debt of the Trove redeemed against.
Liquidations that involve a Stability Pool offset burn tokens from the Stability Pool’s balance, and reduce the MoUSD debt of the liquidated Trove.
The only time MoUSD is transferred to/from a Mosaic contract, is when a user deposits MoUSD to, or withdraws MoUSD from, the StabilityPool.
Borrower Operations
openTrove
Drawn MoUSD
MoUSD._mint(msg.sender, _USDMAmount)
Issuance fee
MoUSD._mint(MSICStaking, USDMFee)
withdrawUSDM
Drawn MoUSD
MoUSD._mint(msg.sender, _USDMAmount)
Issuance fee
MoUSD._mint(MSICStaking, USDMFee)
repayUSDM
Repaid MoUSD
MoUSD._burn(msg.sender, _USDMAmount)
adjustTrove: withdrawing MoUSD
Drawn MoUSD
MoUSD._mint(msg.sender, _USDMAmount)
Issuance fee
MoUSD._mint(MSICStaking, USDMFee)
adjustTrove: repaying MoUSD
Repaid MoUSD
MoUSD._burn(msg.sender, _USDMAmount)
closeTrove
Repaid MoUSD
MoUSD._burn(msg.sender, _USDMAmount)
Trove Manager
liquidate (offset)
MoUSD to offset with debt
MoUSD._burn(stabilityPoolAddress, _debtToOffset);
liquidateTroves (offset)
MoUSD to offset with debt
MoUSD._burn(stabilityPoolAddress, _debtToOffset);
batchLiquidateTroves (offset)
MoUSD to offset with debt
MoUSD._burn(stabilityPoolAddress, _debtToOffset);
redeemCollateral
MoUSD to redeem
MoUSD._burn(msg.sender, _USDM)
Stability Pool
provideToSP
deposit / top-up
MoUSD._transfer(msg.sender, stabilityPoolAddress, _amount);
withdrawFromSP
withdrawal
MoUSD._transfer(stabilityPoolAddress, msg.sender, _amount);
MSIC Staking
stake
staker's accumulated MoUSD gain from system fees
MoUSD._transfer(MSICStakingAddress, msg.sender, USDMGain);
unstake
staker's accumulated MoUSD gain from system fees
MoUSD._transfer(MSICStakingAddress, msg.sender, USDMGain);
Stability Providers and Frontend Operators receive MSIC gains according to their share of the total MoUSD deposits, and the MSIC community issuance schedule. Once obtained, MSIC can be staked and unstaked with the MSICStaking contract.
Stability Pool
provideToSP
depositor MSIC gain
MSIC._transfer(stabilityPoolAddress, msg.sender, depositorMSICGain);
front end MSIC gain
MSIC._transfer(stabilityPoolAddress, _frontEnd, frontEndMSICGain);
withdrawFromSP
depositor MSIC gain
MSIC._transfer(stabilityPoolAddress, msg.sender, depositorMSICGain);
front end MSIC gain
MSIC._transfer(stabilityPoolAddress, _frontEnd, frontEndMSICGain);
withdrawETHGainToTrove
depositor MSIC gain
MSIC._transfer(stabilityPoolAddress, msg.sender, depositorMSICGain);
front end MSIC gain
MSIC._transfer(stabilityPoolAddress, _frontEnd, frontEndMSICGain);
MSIC Staking Contract
stake
staker's MSIC deposit / top-up
MSIC._transfer(msg.sender, MSICStakingAddress, _amount);
unstake
staker's MSIC withdrawal
MSIC._transfer(MSICStakingAddress, msg.sender, _amount);
Generally, borrowers call functions that trigger Trove operations on their own Trove. Stability Pool users (who may or may not also be borrowers) call functions that trigger Stability Pool operations, such as depositing or withdrawing tokens to/from the Stability Pool.
Anyone may call the public liquidation functions, and attempt to liquidate one or several Troves.
MoUSD token holders may also redeem their tokens, and swap an amount of tokens 1-for-1 in value (minus fees) with Reef.
MSIC token holders may stake their MSIC, to earn a share of the system fee revenue, in REEF and MoUSD.
All the core smart contracts inherit from the OpenZeppelin Ownable.sol contract template. As such all contracts have a single owning address, which is the deploying address. The contract's ownership is renounced either upon deployment, or immediately after its address setter has been called, connecting it to the rest of the core Mosaic system.
Several public and external functions have modifiers such as requireCallerIsTroveManager, requireCallerIsActivePool, etc - ensuring they can only be called by the respective permitted contract.
The Hardhat migrations script and deployment helpers in utils/deploymentHelpers.js deploy all contracts, and connect all contracts to their dependency contracts, by setting the necessary deployed addresses.
The project is deployed on the Ropsten testnet.
Run all tests with npx hardhat test, or run a specific test with npx hardhat test ./test/contractTest.js
Tests are run against the Hardhat EVM.
There are some special tests that are using Brownie framework.
To test, install brownie with:
and add numpy with:
Add OpenZeppelin package:
Run, from packages/contracts/:
Add the local node as a live network at ~/.brownie/network-config.yaml:
Make sure state is cleaned up first:
Start Openthereum node from this repo’s root with:
Then, again from packages/contracts/, run it with:
To stop the Openethereum node, you can do it with:
To check test coverage you can run:
You can see the coverage status at mainnet deployment for Liquity protocol here.
There’s also a pull request to increase the coverage, but it hasn’t been merged yet into Liquity's codebase because it modifies some smart contracts (mostly removing unnecessary checks).
Several ratios and the REEF:USD price are integer representations of decimals, to 18 digits of precision. For example:
uint representation of decimal
Number
1100000000000000000
1.1
200000000000000000000
200
1000000000000000000
1
5432100000000000000
5.4321
34560000000
0.00000003456
370000000000000000000
370
1
1e-18
etc.
All data structures with the ‘public’ visibility specifier are ‘gettable’, with getters automatically generated by the compiler. Simply call TroveManager::MCR() to get the MCR, etc.
BorrowerOperations.solopenTrove(uint _maxFeePercentage, uint _USDMAmount, address _upperHint, address _lowerHint): payable function that creates a Trove for the caller with the requested debt, and the Reef received as collateral. Successful execution is conditional mainly on the resulting collateralization ratio which must exceed the minimum (110% in Normal Mode, 150% in Recovery Mode). In addition to the requested debt, extra debt is issued to pay the issuance fee, and cover the gas compensation. The borrower has to provide a _maxFeePercentage that he/she is willing to accept in case of a fee slippage, i.e. when a redemption transaction is processed first, driving up the issuance fee.
addColl(address _upperHint, address _lowerHint)): payable function that adds the received Reef to the caller's active Trove.
withdrawColl(uint _amount, address _upperHint, address _lowerHint): withdraws _amount of collateral from the caller’s Trove. Executes only if the user has an active Trove, the withdrawal would not pull the user’s Trove below the minimum collateralization ratio, and the resulting total collateralization ratio of the system is above 150%.
function withdrawUSDM(uint _maxFeePercentage, uint _USDMAmount, address _upperHint, address _lowerHint): issues _amount of MoUSD from the caller’s Trove to the caller. Executes only if the Trove's collateralization ratio would remain above the minimum, and the resulting total collateralization ratio is above 150%. The borrower has to provide a _maxFeePercentage that he/she is willing to accept in case of a fee slippage, i.e. when a redemption transaction is processed first, driving up the issuance fee.
repayUSDM(uint _amount, address _upperHint, address _lowerHint): repay _amount of MoUSD to the caller’s Trove, subject to leaving 50 debt in the Trove (which corresponds to the 50 MoUSD gas compensation).
_adjustTrove(address _borrower, uint _collWithdrawal, uint _debtChange, bool _isDebtIncrease, address _upperHint, address _lowerHint, uint _maxFeePercentage): enables a borrower to simultaneously change both their collateral and debt, subject to all the restrictions that apply to individual increases/decreases of each quantity with the following particularity: if the adjustment reduces the collateralization ratio of the Trove, the function only executes if the resulting total collateralization ratio is above 150%. The borrower has to provide a _maxFeePercentage that he/she is willing to accept in case of a fee slippage, i.e. when a redemption transaction is processed first, driving up the issuance fee. The parameter is ignored if the debt is not increased with the transaction.
closeTrove(): allows a borrower to repay all debt, withdraw all their collateral, and close their Trove. Requires the borrower have a MoUSD balance sufficient to repay their trove's debt, excluding gas compensation - i.e. (debt - 50) MoUSD.
claimCollateral(address _user): when a borrower’s Trove has been fully redeemed from and closed, or liquidated in Recovery Mode with a collateralization ratio above 110%, this function allows the borrower to claim their REEF collateral surplus that remains in the system (collateral - debt upon redemption; collateral - 110% of the debt upon liquidation).
TroveManager.solliquidate(address _borrower): callable by anyone, attempts to liquidate the Trove of _user. Executes successfully if _user’s Trove meets the conditions for liquidation (e.g. in Normal Mode, it liquidates if the Trove's ICR < the system MCR).
liquidateTroves(uint n): callable by anyone, checks for under-collateralized Troves below MCR and liquidates up to n, starting from the Trove with the lowest collateralization ratio; subject to gas constraints and the actual number of under-collateralized Troves. The gas costs of liquidateTroves(uint n) mainly depend on the number of Troves that are liquidated, and whether the Troves are offset against the Stability Pool or redistributed. For n=1, the gas costs per liquidated Trove are roughly between 215K-400K, for n=5 between 80K-115K, for n=10 between 70K-82K, and for n=50 between 60K-65K.
batchLiquidateTroves(address[] calldata _troveArray): callable by anyone, accepts a custom list of Troves addresses as an argument. Steps through the provided list and attempts to liquidate every Trove, until it reaches the end or it runs out of gas. A Trove is liquidated only if it meets the conditions for liquidation. For a batch of 10 Troves, the gas costs per liquidated Trove are roughly between 75K-83K, for a batch of 50 Troves between 54K-69K.
redeemCollateral(uint _USDMAmount, address _firstRedemptionHint, address _upperPartialRedemptionHint, address _lowerPartialRedemptionHint, uint _partialRedemptionHintNICR, uint _maxIterations, uint _maxFeePercentage): redeems _USDMamount of stablecoins for ether from the system. Decreases the caller’s MoUSD balance, and sends them the corresponding amount of REEF. Executes successfully if the caller has sufficient MoUSD to redeem. The number of Troves redeemed from is capped by _maxIterations. The borrower has to provide a _maxFeePercentage that he/she is willing to accept in case of a fee slippage, i.e. when another redemption transaction is processed first, driving up the redemption fee.
getCurrentICR(address _user, uint _price): computes the user’s individual collateralization ratio (ICR) based on their total collateral and total MoUSD debt. Returns 2^256 -1 if they have 0 debt.
getTroveOwnersCount(): get the number of active Troves in the system.
getPendingETHReward(address _borrower): get the pending REEF reward from liquidation redistribution events, for the given Trove.
getPendingUSDMDebtReward(address _borrower): get the pending Trove debt "reward" (i.e. the amount of extra debt assigned to the Trove) from liquidation redistribution events.
getEntireDebtAndColl(address _borrower): returns a Trove’s entire debt and collateral, which respectively include any pending debt rewards and REEF rewards from prior redistributions.
getEntireSystemColl(): Returns the systemic entire collateral allocated to Troves, i.e. the sum of the REEF in the Active Pool and the Default Pool.
getEntireSystemDebt() Returns the systemic entire debt assigned to Troves, i.e. the sum of the USDMDebt in the Active Pool and the Default Pool.
getTCR(): returns the total collateralization ratio (TCR) of the system. The TCR is based on the entire system debt and collateral (including pending rewards).
checkRecoveryMode(): reveals whether or not the system is in Recovery Mode (i.e. whether the Total Collateralization Ratio (TCR) is below the Critical Collateralization Ratio (CCR)).
HintHelpers.solfunction getApproxHint(uint _CR, uint _numTrials, uint _inputRandomSeed): helper function, returns a positional hint for the sorted list. Used for transactions that must efficiently re-insert a Trove to the sorted list.
getRedemptionHints(uint _USDMamount, uint _price, uint _maxIterations): helper function specifically for redemptions. Returns three hints:
firstRedemptionHint is a positional hint for the first redeemable Trove (i.e. Trove with the lowest ICR >= MCR).
partialRedemptionHintNICR is the final nominal ICR of the last Trove after being hit by partial redemption, or zero in case of no partial redemption (see Hints for redeemCollateral).
truncatedUSDMamount is the maximum amount that can be redeemed out of the provided _USDMamount. This can be lower than _USDMamount when redeeming the full amount would leave the last Trove of the redemption sequence with less debt than the minimum allowed value.
The number of Troves to consider for redemption can be capped by passing a non-zero value as _maxIterations, while passing zero will leave it uncapped.
StabilityPool.solprovideToSP(uint _amount, address _frontEndTag): allows stablecoin holders to deposit _amount of MoUSD to the Stability Pool. It sends _amount of MoUSD from their address to the Pool, and tops up their MoUSD deposit by _amount and their tagged front end’s stake by _amount. If the depositor already has a non-zero deposit, it sends their accumulated REEF and MSIC gains to their address, and pays out their front end’s MSIC gain to their front end.
withdrawFromSP(uint _amount): allows a stablecoin holder to withdraw _amount of MoUSD from the Stability Pool, up to the value of their remaining Stability deposit. It decreases their MoUSD balance by _amount and decreases their front end’s stake by _amount. It sends the depositor’s accumulated REEF and MSIC gains to their address, and pays out their front end’s MSIC gain to their front end. If the user makes a partial withdrawal, their deposit remainder will earn further gains. To prevent potential loss evasion by depositors, withdrawals from the Stability Pool are suspended when there are liquidable Troves with ICR < 110% in the system.
withdrawETHGainToTrove(address _hint): sends the user's entire accumulated REEF gain to the user's active Trove, and updates their Stability deposit with its accumulated loss from debt absorptions. Sends the depositor's MSIC gain to the depositor, and sends the tagged front end's MSIC gain to the front end.
registerFrontEnd(uint _kickbackRate): Registers an address as a front end and sets their chosen kickback rate in range [0,1].
getDepositorETHGain(address _depositor): returns the accumulated REEF gain for a given Stability Pool depositor
getDepositorMSICGain(address _depositor): returns the accumulated MSIC gain for a given Stability Pool depositor
getFrontEndMSICGain(address _frontEnd): returns the accumulated MSIC gain for a given front end
getCompoundedUSDMDeposit(address _depositor): returns the remaining deposit amount for a given Stability Pool depositor
getCompoundedFrontEndStake(address _frontEnd): returns the remaining front end stake for a given front end
MSICStaking.solstake(uint _MSICamount): sends _MSICAmount from the caller to the staking contract, and increases their stake. If the caller already has a non-zero stake, it pays out their accumulated REEF and MoUSD gains from staking.
unstake(uint _MSICamount): reduces the caller’s stake by _MSICamount, up to a maximum of their entire stake. It pays out their accumulated REEF and MoUSD gains from staking.
LockupContractFactory.soldeployLockupContract(address _beneficiary, uint _unlockTime); Deploys a LockupContract, and sets the beneficiary’s address, and the _unlockTime - the instant in time at which the MSIC can be withrawn by the beneficiary.
LockupContract.solwithdrawMSIC(): When the current time is later than the unlockTime and the caller is the beneficiary, it transfers their MSIC to them.
USDMToken.sol and MSIC token MSICToken.solStandard ERC20 and EIP2612 (permit() ) functionality.
Note: permit() can be front-run, as it does not require that the permitted spender be the msg.sender.
This allows flexibility, as it means that anyone can submit a Permit signed by A that allows B to spend a portion of A's tokens.
The end result is the same for the signer A and spender B, but does mean that a permit transaction could be front-run and revert - which may hamper the execution flow of a contract that is intended to handle the submission of a Permit on-chain.
For more details please see the original proposal EIP-2612: https://eips.ethereum.org/EIPS/eip-2612
Troves in Mosaic are recorded in a sorted doubly linked list, sorted by their NICR, from high to low. NICR stands for the nominal collateral ratio that is simply the amount of collateral (in REEF) multiplied by 100e18 and divided by the amount of debt (in MoUSD), without taking the REEF:USD price into account. Given that all Troves are equally affected by Reef price changes, they do not need to be sorted by their real ICR.
All Trove operations that change the collateralization ratio need to either insert or reinsert the Trove to the SortedTroves list. To reduce the computational complexity (and gas cost) of the insertion to the linked list, two ‘hints’ may be provided.
A hint is the address of a Trove with a position in the sorted list close to the correct insert position.
All Trove operations take two ‘hint’ arguments: a _lowerHint referring to the nextId and an _upperHint referring to the prevId of the two adjacent nodes in the linked list that are (or would become) the neighbors of the given Trove. Taking both direct neighbors as hints has the advantage of being much more resilient to situations where a neighbor gets moved or removed before the caller's transaction is processed: the transaction would only fail if both neighboring Troves are affected during the pendency of the transaction.
The better the ‘hint’ is, the shorter the list traversal, and the cheaper the gas cost of the function call. SortedList::findInsertPosition(uint256 _NICR, address _prevId, address _nextId) that is called by the Trove operation firsts check if prevId is still existant and valid (larger NICR than the provided _NICR) and then descends the list starting from prevId. If the check fails, the function further checks if nextId is still existant and valid (smaller NICR than the provided _NICR) and then ascends list starting from nextId.
The HintHelpers::getApproxHint(...) function can be used to generate a useful hint pointing to a Trove relatively close to the target position, which can then be passed as an argument to the desired Trove operation or to SortedTroves::findInsertPosition(...) to get its two direct neighbors as ‘exact‘ hints (based on the current state of the system).
getApproxHint(uint _CR, uint _numTrials, uint _inputRandomSeed) randomly selects numTrials amount of Troves, and returns the one with the closest position in the list to where a Trove with a nominal collateralization ratio of _CR should be inserted. It can be shown mathematically that for numTrials = k * sqrt(n), the function's gas cost is with very high probability worst case O(sqrt(n)) if k >= 10. For scalability reasons (Infura is able to serve up to ~4900 trials), the function also takes a random seed _inputRandomSeed to make sure that calls with different seeds may lead to a different results, allowing for better approximations through multiple consecutive runs.
Trove operation without a hint
User performs Trove operation in their browser
Call the Trove operation with _lowerHint = _upperHint = userAddress
Gas cost will be worst case O(n), where n is the size of the SortedTroves list.
Trove operation with hints
User performs Trove operation in their browser
The front end computes a new collateralization ratio locally, based on the change in collateral and/or debt.
Call HintHelpers::getApproxHint(...), passing it the computed nominal collateralization ratio. Returns an address close to the correct insert position
Call SortedTroves::findInsertPosition(uint256 _NICR, address _prevId, address _nextId), passing it the same approximate hint via both _prevId and _nextId and the new nominal collateralization ratio via _NICR.
Pass the ‘exact‘ hint in the form of the two direct neighbors, i.e. _nextId as _lowerHint and _prevId as _upperHint, to the Trove operation function call. (Note that the hint may become slightly inexact due to pending transactions that are processed first, though this is gracefully handled by the system that can ascend or descend the list as needed to find the right position.)
Gas cost of steps 2-4 will be free, and step 5 will be O(1).
Hints allow cheaper Trove operations for the user, at the expense of a slightly longer time to completion, due to the need to await the result of the two read calls in steps 1 and 2 - which may be sent as JSON-RPC requests to Infura, unless the Frontend Operator is running a full Ethereum node.
redeemCollateralTroveManager::redeemCollateral as a special case requires additional hints:
_firstRedemptionHint hints at the position of the first Trove that will be redeemed from,
_lowerPartialRedemptionHint hints at the nextId neighbor of the last redeemed Trove upon reinsertion, if it's partially redeemed,
_upperPartialRedemptionHint hints at the prevId neighbor of the last redeemed Trove upon reinsertion, if it's partially redeemed,
_partialRedemptionHintNICR ensures that the transaction won't run out of gas if neither _lowerPartialRedemptionHint nor _upperPartialRedemptionHint are valid anymore.
redeemCollateral will only redeem from Troves that have an ICR >= MCR. In other words, if there are Troves at the bottom of the SortedTroves list that are below the minimum collateralization ratio (which can happen after an REEF:USD price drop), they will be skipped. To make this more gas-efficient, the position of the first redeemable Trove should be passed as _firstRedemptionHint.
The first redemption hint is the address of the trove from which to start the redemption sequence - i.e the address of the first trove in the system with ICR >= 110%.
If when the transaction is confirmed the address is in fact not valid - the system will start from the lowest ICR trove in the system, and step upwards until it finds the first trove with ICR >= 110% to redeem from. In this case, since the number of troves below 110% will be limited due to ongoing liquidations, there's a good chance that the redemption transaction still succeed.
All Troves that are fully redeemed from in a redemption sequence are left with zero debt, and are closed. The remaining collateral (the difference between the orginal collateral and the amount used for the redemption) will be claimable by the owner.
It’s likely that the last Trove in the redemption sequence would be partially redeemed from - i.e. only some of its debt cancelled with MoUSD. In this case, it should be reinserted somewhere between top and bottom of the list. The _lowerPartialRedemptionHint and _upperPartialRedemptionHint hints passed to redeemCollateral describe the future neighbors the expected reinsert position.
However, if between the off-chain hint computation and on-chain execution a different transaction changes the state of a Trove that would otherwise be hit by the redemption sequence, then the off-chain hint computation could end up totally inaccurate. This could lead to the whole redemption sequence reverting due to out-of-gas error.
To mitigate this, another hint needs to be provided: _partialRedemptionHintNICR, the expected nominal ICR of the final partially-redeemed-from Trove. The on-chain redemption function checks whether, after redemption, the nominal ICR of this Trove would equal the nominal ICR hint.
If not, the redemption sequence doesn’t perform the final partial redemption, and terminates early. This ensures that the transaction doesn’t revert, and most of the requested MoUSD redemption can be fulfilled.
In Mosaic, we want to maximize liquidation throughput, and ensure that undercollateralized Troves are liquidated promptly by “liquidators” - agents who may also hold Stability Pool deposits, and who expect to profit from liquidations.
However, gas costs in Ethereum are substantial. If the gas costs of our public liquidation functions are too high, this may discourage liquidators from calling them, and leave the system holding too many undercollateralized Troves for too long.
The protocol thus directly compensates liquidators for their gas costs, to incentivize prompt liquidations in both normal and extreme periods of high gas prices. Liquidators should be confident that they will at least break even by making liquidation transactions.
Gas compensation is paid in a mix of MoUSD and REEF. While the REEF is taken from the liquidated Trove, the MoUSD is provided by the borrower. When a borrower first issues debt, some MoUSD is reserved as a Liquidation Reserve. A liquidation transaction thus draws REEF from the trove(s) it liquidates, and sends the both the reserved MoUSD and the compensation in REEF to the caller, and liquidates the remainder.
When a liquidation transaction liquidates multiple Troves, each Trove contributes MoUSD and REEF towards the total compensation for the transaction.
Gas compensation per liquidated Trove is given by the formula:
Gas compensation = 200 MoUSD + 0.5% of trove’s collateral (REEF)
The intentions behind this formula are:
To ensure that smaller Troves are liquidated promptly in normal times, at least
To ensure that larger Troves are liquidated promptly even in extreme high gas price periods. The larger the Trove, the stronger the incentive to liquidate it.
When a borrower opens a Trove, an additional 200 MoUSD debt is issued, and 200 MoUSD is minted and sent to a dedicated contract (GasPool) for gas compensation - the "gas pool".
When a borrower closes their active Trove, this gas compensation is refunded: 200 MoUSD is burned from the gas pool's balance, and the corresponding 200 MoUSD debt on the Trove is cancelled.
The purpose of the 200 MoUSD Liquidation Reserve is to provide a minimum level of gas compensation, regardless of the Trove's collateral size or the current REEF price.
When a Trove is liquidated, 0.5% of its collateral is sent to the liquidator, along with the 200 MoUSD Liquidation Reserve. Thus, a liquidator always receives {200 MoUSD + 0.5% collateral} per Trove that they liquidate. The collateral remainder of the Trove is then either offset, redistributed or a combination of both, depending on the amount of MoUSD in the Stability Pool.
When a Trove is redeemed from, the redemption is made only against (debt - 200), not the entire debt.
But if the redemption causes an amount (debt - 200) to be cancelled, the Trove is then closed: the 200 MoUSD Liquidation Reserve is cancelled with its remaining 200 debt. That is, the gas compensation is burned from the gas pool, and the 200 debt is zero’d. The REEF collateral surplus from the Trove remains in the system, to be later claimed by its owner.
Gas compensation functions are found in the parent MosaicBase.sol contract:
_getCollGasCompensation(uint _entireColl) returns the amount of REEF to be drawn from a trove's collateral and sent as gas compensation.
_getCompositeDebt(uint _debt) returns the composite debt (drawn debt + gas compensation) of a trove, for the purpose of ICR calculation.
Any MoUSD holder may deposit MoUSD to the Stability Pool. It is designed to absorb debt from liquidations, and reward depositors with the liquidated collateral, shared between depositors in proportion to their deposit size.
Since liquidations are expected to occur at an ICR of just below 110%, and even in most extreme cases, still above 100%, a depositor can expect to receive a net gain from most liquidations. When that holds, the dollar value of the REEF gain from a liquidation exceeds the dollar value of the MoUSD loss (assuming the price of MoUSD is $1).
We define the collateral surplus in a liquidation as $(REEF) - debt, where $(...) represents the dollar value.
At an MoUSD price of $1, Troves with ICR > 100% have a positive collateral surplus.
After one or more liquidations, a deposit will have absorbed MoUSD losses, and received REEF gains. The remaining reduced deposit is the compounded deposit.
Stability Providers expect a positive ROI on their initial deposit. That is:
$(REEF Gain + compounded deposit) > $(initial deposit)
When a liquidation hits the Stability Pool, it is known as an offset: the debt of the Trove is offset against the MoUSD in the Pool. When x MoUSD debt is offset, the debt is cancelled, and x MoUSD in the Pool is burned. When the MoUSD Stability Pool is greater than the debt of the Trove, all the Trove's debt is cancelled, and all its REEF is shared between depositors. This is a pure offset.
It can happen that the MoUSD in the Stability Pool is less than the debt of a Trove. In this case, the whole Stability Pool will be used to offset a fraction of the Trove’s debt, and an equal fraction of the Trove’s REEF collateral will be assigned to Stability Providers. The remainder of the Trove’s debt and REEF gets redistributed to active Troves. This is a mixed offset and redistribution.
Because the REEF collateral fraction matches the offset debt fraction, the effective ICR of the collateral and debt that is offset, is equal to the ICR of the Trove. So, for depositors, the ROI per liquidation depends only on the ICR of the liquidated Trove.
Deposit functionality is handled by StabilityPool.sol (provideToSP, withdrawFromSP, etc). StabilityPool also handles the liquidation calculation, and holds the MoUSD and REEF balances.
When a liquidation is offset with the Stability Pool, debt from the liquidation is cancelled with an equal amount of MoUSD in the pool, which is burned.
Individual deposits absorb the debt from the liquidated Trove in proportion to their deposit as a share of total deposits.
Similarly the liquidated Trove’s REEF is assigned to depositors in the same proportion.
For example: a liquidation that empties 30% of the Stability Pool will reduce each deposit by 30%, no matter the size of the deposit.
Here’s an example of the Stability Pool absorbing liquidations. The Stability Pool contains 3 depositors, A, B and C, and the REEF:USD price is 100.
There are two Troves to be liquidated, T1 and T2:
T1
1.6
150
1.066666667
160
10
T2
2.45
225
1.088888889
245
20
Here are the deposits, before any liquidations occur:
A
100
0.1667
B
200
0.3333
C
300
0.5
Total
600
1
Now, the first liquidation T1 is absorbed by the Pool: 150 debt is cancelled with 150 Pool MoUSD, and its 1.6 REEF is split between depositors. We see the gains earned by A, B, C, are in proportion to their share of the total MoUSD in the Stability Pool:
A
25
75
0.2666666667
101.6666667
0.01666666667
B
50
150
0.5333333333
203.3333333
0.01666666667
C
75
225
0.8
305
0.01666666667
Total
150
450
1.6
610
0.01666666667
And now the second liquidation, T2, occurs: 225 debt is cancelled with 225 Pool MoUSD, and 2.45 REEF is split between depositors. The accumulated REEF gain includes all REEF gain from T1 and T2.
A
37.5
37.5
0.675
105
0.05
B
75
75
1.35
210
0.05
C
112.5
112.5
2.025
315
0.05
Total
225
225
4.05
630
0.05
It’s clear that:
Each depositor gets the same ROI from a given liquidation
Depositors return increases over time, as the deposits absorb liquidations with a positive collateral surplus
Eventually, a deposit can be fully “used up” in absorbing debt, and reduced to 0. This happens whenever a liquidation occurs that empties the Stability Pool. A deposit stops earning REEF gains when it has been reduced to 0.
A depositor obtains their compounded deposits and corresponding REEF gain in a “pull-based” manner. The system calculates the depositor’s compounded deposit and accumulated REEF gain when the depositor makes an operation that changes their REEF deposit.
Depositors deposit MoUSD via provideToSP, and withdraw with withdrawFromSP. Their accumulated REEF gain is paid out every time they make a deposit operation - so REEF payout is triggered by both deposit withdrawals and top-ups.
We use a highly scalable method of tracking deposits and REEF gains that has O(1) complexity.
When a liquidation occurs, rather than updating each depositor’s deposit and REEF gain, we simply update two intermediate variables: a product P, and a sum S.
A mathematical manipulation allows us to factor out the initial deposit, and accurately track all depositors’ compounded deposits and accumulated REEF gains over time, as liquidations occur, using just these two variables. When depositors join the Pool, they get a snapshot of P and S.
The formula for a depositor’s accumulated REEF gain is derived here:
Scalable reward distribution for compounding, decreasing stake
Each liquidation updates P and S. After a series of liquidations, a compounded deposit and corresponding REEF gain can be calculated using the initial deposit, the depositor’s snapshots, and the current values of P and S.
Any time a depositor updates their deposit (withdrawal, top-up) their REEF gain is paid out, and they receive new snapshots of P and S.
This is similar in spirit to the simpler Scalable Reward Distribution on the Ethereum Network by Bogdan Batog et al, however, the mathematics is more involved as we handle a compounding, decreasing stake, and a corresponding REEF reward.
Stability Providers earn MSIC tokens continuously over time, in proportion to the size of their deposit. This is known as “Community Issuance”, and is handled by CommunityIssuance.sol.
Upon system deployment and activation, CommunityIssuance holds an initial MSIC supply, currently (provisionally) set at 32 million MSIC tokens.
Each Stability Pool deposit is tagged with a front end tag - the Ethereum address of the front end through which the deposit was made. Stability deposits made directly with the protocol (no front end) are tagged with the zero address.
When a deposit earns MSIC, it is split between the depositor, and the front end through which the deposit was made. Upon registering as a front end, a front end chooses a “kickback rate”: this is the percentage of MSIC earned by a tagged deposit, to allocate to the depositor. Thus, the total MSIC received by a depositor is the total MSIC earned by their deposit, multiplied by kickbackRate. The front end takes a cut of 1-kickbackRate of the MSIC earned by the deposit.
The overall community issuance schedule for MSIC is sub-linear and monotonic. We currently (provisionally) implement a yearly “halving” schedule, described by the cumulative issuance function:
supplyCap * (1 - 0.5^t)
where t is year and supplyCap is (provisionally) set to represent 32 million MSIC tokens.
It results in the following cumulative issuance schedule for the community MSIC supply:
0
0%
1
50%
2
75%
3
87.5%
4
93.75%
5
96.88%
The shape of the MSIC issuance curve is intended to incentivize both early depositors, and long-term deposits.
Although the MSIC issuance curve follows a yearly halving schedule, in practice the CommunityIssuance contract use time intervals of one minute, for more fine-grained reward calculations.
The continuous time-based MSIC issuance is chunked into discrete reward events, that occur at every deposit change (new deposit, top-up, withdrawal), and every liquidation, before other state changes are made.
In a MSIC reward event, the MSIC to be issued is calculated based on time passed since the last reward event, block.timestamp - lastMSICIssuanceTime, and the cumulative issuance function.
The MSIC produced in this issuance event is shared between depositors, in proportion to their deposit sizes.
To efficiently and accurately track MSIC gains for depositors and front ends as deposits decrease over time from liquidations, we re-use the algorithm for rewards from a compounding, decreasing stake. It is the same algorithm used for the REEF gain from liquidations.
The same product P is used, and a sum G is used to track MSIC rewards, and each deposit gets a new snapshot of P and G when it is updated.
As mentioned in MSIC Issuance to Stability Providers, in a MSIC reward event generating MSIC_d for a deposit d made through a front end with kickback rate k, the front end receives (1-k) * MSIC_d and the depositor receives k * MSIC_d.
The front end should earn a cut of MSIC gains for all deposits tagged with its front end.
Thus, we use a virtual stake for the front end, equal to the sum of all its tagged deposits. The front end’s accumulated MSIC gain is calculated in the same way as an individual deposit, using the product P and sum G.
Also, whenever one of the front end’s depositors tops or withdraws their deposit, the same change is applied to the front-end’s stake.
When a deposit is changed (top-up, withdrawal):
A MSIC reward event occurs, and G is updated
Its REEF and MSIC gains are paid out
Its tagged front end’s MSIC gains are paid out to that front end
The deposit is updated, with new snapshots of P, S and G
The front end’s stake updated, with new snapshots of P and G
When a liquidation occurs:
A MSIC reward event occurs, and G is updated
On deployment a new Uniswap pool will be created for the pair MoUSD/REEF and a Staking rewards contract will be deployed. The contract is based on Unipool by Synthetix. More information about their liquidity rewards program can be found in the original SIP 31 and in their blog.
Essentially the way it works is:
Liqudity providers add funds to the Uniswap pool, and get UNIv2 tokens in exchange
Liqudity providers stake those UNIv2 tokens into Unipool rewards contract
Liqudity providers accrue rewards, proportional to the amount of staked tokens and staking time
Liqudity providers can claim their rewards when they want
Liqudity providers can unstake UNIv2 tokens to exit the program (i.e., stop earning rewards) when they want
Our implementation is simpler because funds for rewards will only be added once, on deployment of MSIC token (for more technical details about the differences, see PR #271 on our repo).
The amount of MSIC tokens that will be minted to rewards contract is 1.33M, and the duration of the program will be 30 days. If at some point the total amount of staked tokens is zero, the clock will be “stopped”, so the period will be extended by the time during which the staking pool is empty, in order to avoid getting MSIC tokens locked. That also means that the start time for the program will be the event that occurs first: either MSIC token contract is deployed, and therefore MSIC tokens are minted to Unipool contract, or first liquidity provider stakes UNIv2 tokens into it.
Mosaic generates fee revenue from certain operations. Fees are captured by the MSIC token.
A MSIC holder may stake their MSIC, and earn a share of all system fees, proportional to their share of the total MSIC staked.
Mosaic generates revenue in two ways: redemptions, and issuance of new MoUSD tokens.
Redemptions fees are paid in REEF. Issuance fees (when a user opens a Trove, or issues more MoUSD from their existing Trove) are paid in MoUSD.
The redemption fee is taken as a cut of the total REEF drawn from the system in a redemption. It is based on the current redemption rate.
In the TroveManager, redeemCollateral calculates the REEF fee and transfers it to the staking contract, MSICStaking.sol
The issuance fee is charged on the MoUSD drawn by the user and is added to the Trove's MoUSD debt. It is based on the current borrowing rate.
When new MoUSD are drawn via one of the BorrowerOperations functions openTrove, withdrawUSDM or adjustTrove, an extra amount USDMFee is minted, and an equal amount of debt is added to the user’s Trove. The USDMFee is transferred to the staking contract, MSICStaking.sol.
Redemption and issuance fees are based on the baseRate state variable in TroveManager, which is dynamically updated. The baseRate increases with each redemption, and decays according to time passed since the last fee event - i.e. the last redemption or issuance of MoUSD.
The current fee schedule:
Upon each redemption:
baseRate is decayed based on time passed since the last fee event
baseRate is incremented by an amount proportional to the fraction of the total MoUSD supply that was redeemed
The redemption rate is given by min{REDEMPTION_FEE_FLOOR + baseRate * ETHdrawn, DECIMAL_PRECISION}
Upon each debt issuance:
baseRate is decayed based on time passed since the last fee event
The borrowing rate is given by min{BORROWING_FEE_FLOOR + baseRate * newDebtIssued, MAX_BORROWING_FEE}
REDEMPTION_FEE_FLOOR and BORROWING_FEE_FLOOR are both set to 0.5%, while MAX_BORROWING_FEE is 5% and DECIMAL_PRECISION is 100%.
The larger the redemption volume, the greater the fee percentage.
The longer the time delay since the last operation, the more the baseRate decreases.
The intent is to throttle large redemptions with higher fees, and to throttle borrowing directly after large redemption volumes. The baseRate decay over time ensures that the fee for both borrowers and redeemers will “cool down”, while redemptions volumes are low.
Furthermore, the fees cannot become smaller than 0.5%, which in the case of redemptions protects the redemption facility from being front-run by arbitrageurs that are faster than the price feed. The 5% maximum on the issuance is meant to keep the system (somewhat) attractive for new borrowers even in phases where the monetary is contracting due to redemptions.
Time is measured in units of minutes. The baseRate decay is based on block.timestamp - lastFeeOpTime. If less than a minute has passed since the last fee event, then lastFeeOpTime is not updated. This prevents “base rate griefing”: i.e. it prevents an attacker stopping the baseRate from decaying by making a series of redemptions or issuing MoUSD with time intervals of < 1 minute.
The decay parameter is tuned such that the fee changes by a factor of 0.99 per hour, i.e. it loses 1% of its current value per hour. At that rate, after one week, the baseRate decays to 18% of its prior value. The exact decay parameter is subject to change, and will be fine-tuned via economic modelling.
MSIC holders may stake and unstake their MSIC in the MSICStaking.sol contract.
When a fee event occurs, the fee in MoUSD or REEF is sent to the staking contract, and a reward-per-unit-staked sum (F_ETH, or F_USDM) is incremented. A MSIC stake earns a share of the fee equal to its share of the total MSIC staked, at the instant the fee occurred.
This staking formula and implementation follows the basic “Batog” pull-based reward distribution.
When a liquidation occurs and the Stability Pool is empty or smaller than the liquidated debt, the redistribution mechanism should distribute the remaining collateral and debt of the liquidated Trove, to all active Troves in the system, in proportion to their collateral.
For two Troves A and B with collateral A.coll > B.coll, Trove A should earn a bigger share of the liquidated collateral and debt.
In Mosaic it is important that all active Troves remain ordered by their ICR. We have proven that redistribution of the liquidated debt and collateral proportional to active Troves’ collateral, preserves the ordering of active Troves by ICR, as liquidations occur over time. Please see the proofs section.
However, when it comes to implementation, Ethereum gas costs make it too expensive to loop over all Troves and write new data to storage for each one. When a Trove receives redistribution rewards, the system does not update the Trove's collateral and debt properties - instead, the Trove’s rewards remain "pending" until the borrower's next operation.
These “pending rewards” can not be accounted for in future reward calculations in a scalable way.
However: the ICR of a Trove is always calculated as the ratio of its total collateral to its total debt. So, a Trove’s ICR calculation does include all its previous accumulated rewards.
This causes a problem: redistributions proportional to initial collateral can break trove ordering.
Consider the case where new Trove is created after all active Troves have received a redistribution from a liquidation. This “fresh” Trove has then experienced fewer rewards than the older Troves, and thus, it receives a disproportionate share of subsequent rewards, relative to its total collateral.
The fresh trove would earns rewards based on its entire collateral, whereas old Troves would earn rewards based only on some portion of their collateral - since a part of their collateral is pending, and not included in the Trove’s coll property.
This can break the ordering of Troves by ICR - see the proofs section.
We use a corrected stake to account for this discrepancy, and ensure that newer Troves earn the same liquidation rewards per unit of total collateral, as do older Troves with pending rewards. Thus the corrected stake ensures the sorted list remains ordered by ICR, as liquidation events occur over time.
When a Trove is opened, its stake is calculated based on its collateral, and snapshots of the entire system collateral and debt which were taken immediately after the last liquidation.
A Trove’s stake is given by:
It then earns redistribution rewards based on this corrected stake. A newly opened Trove’s stake will be less than its raw collateral, if the system contains active Troves with pending redistribution rewards when it was made.
Whenever a borrower adjusts their Trove’s collateral, their pending rewards are applied, and a fresh corrected stake is computed.
To convince yourself this corrected stake preserves ordering of active Troves by ICR, please see the proofs section.
The Mosaic implementation relies on some important system properties and mathematical derivations.
In particular, we have:
Proofs that Trove ordering is maintained throughout a series of liquidations and new Trove openings
A derivation of a formula and implementation for a highly scalable (O(1) complexity) reward distribution in the Stability Pool, involving compounding and decreasing stakes.
PDFs of these can be found in https://github.com/commcommxyz/mosaic-dev/dev/blob/main/papers
Trove: a collateralized debt position, bound to a single Ethereum address. Also referred to as a “CDP” in similar protocols.
MoUSD: The stablecoin that may be issued from a user's collateralized debt position and freely transferred/traded to any Ethereum address. Intended to maintain parity with the US dollar, and can always be redeemed directly with the system: 1 MoUSD is always exchangeable for $1 USD worth of REEF.
Active Trove: an Ethereum address owns an “active Trove” if there is a node in the SortedTroves list with ID equal to the address, and non-zero collateral is recorded on the Trove struct for that address.
Closed Trove: a Trove that was once active, but now has zero debt and zero collateral recorded on its struct, and there is no node in the SortedTroves list with ID equal to the owning address.
Active collateral: the amount of REEF collateral recorded on a Trove’s struct
Active debt: the amount of MoUSD debt recorded on a Trove’s struct
Entire collateral: the sum of a Trove’s active collateral plus its pending collateral rewards accumulated from distributions
Entire debt: the sum of a Trove’s active debt plus its pending debt rewards accumulated from distributions
Individual collateralization ratio (ICR): a Trove's ICR is the ratio of the dollar value of its entire collateral at the current REEF:USD price, to its entire debt
Nominal collateralization ratio (nominal ICR, NICR): a Trove's nominal ICR is its entire collateral (in REEF) multiplied by 100e18 and divided by its entire debt.
Total active collateral: the sum of active collateral over all Troves. Equal to the REEF in the ActivePool.
Total active debt: the sum of active debt over all Troves. Equal to the MoUSD in the ActivePool.
Total defaulted collateral: the total REEF collateral in the DefaultPool
Total defaulted debt: the total MoUSD debt in the DefaultPool
Entire system collateral: the sum of the collateral in the ActivePool and DefaultPool
Entire system debt: the sum of the debt in the ActivePool and DefaultPool
Total collateralization ratio (TCR): the ratio of the dollar value of the entire system collateral at the current REEF:USD price, to the entire system debt
Critical collateralization ratio (CCR): 150%. When the TCR is below the CCR, the system enters Recovery Mode.
Borrower: an externally owned account or contract that locks collateral in a Trove and issues MoUSD tokens to their own address. They “borrow” MoUSD tokens against their REEF collateral.
Depositor: an externally owned account or contract that has assigned MoUSD tokens to the Stability Pool, in order to earn returns from liquidations, and receive MSIC token issuance.
Redemption: the act of swapping MoUSD tokens with the system, in return for an equivalent value of REEF. Any account with a MoUSD token balance may redeem them, whether or not they are a borrower.
When MoUSD is redeemed for REEF, the REEF is always withdrawn from the lowest collateral Troves, in ascending order of their collateralization ratio. A redeemer can not selectively target Troves with which to swap MoUSD for REEF.
Repayment: when a borrower sends MoUSD tokens to their own Trove, reducing their debt, and increasing their collateralization ratio.
Retrieval: when a borrower with an active Trove withdraws some or all of their REEF collateral from their own trove, either reducing their collateralization ratio, or closing their Trove (if they have zero debt and withdraw all their REEF)
Liquidation: the act of force-closing an undercollateralized Trove and redistributing its collateral and debt. When the Stability Pool is sufficiently large, the liquidated debt is offset with the Stability Pool, and the REEF distributed to depositors. If the liquidated debt can not be offset with the Pool, the system redistributes the liquidated collateral and debt directly to the active Troves with >110% collateralization ratio.
Liquidation functionality is permissionless and publically available - anyone may liquidate an undercollateralized Trove, or batch liquidate Troves in ascending order of collateralization ratio.
Collateral Surplus: The difference between the dollar value of a Trove's REEF collateral, and the dollar value of its MoUSD debt. In a full liquidation, this is the net gain earned by the recipients of the liquidation.
Offset: cancellation of liquidated debt with MoUSD in the Stability Pool, and assignment of liquidated collateral to Stability Pool depositors, in proportion to their deposit.
Redistribution: assignment of liquidated debt and collateral directly to active Troves, in proportion to their collateral.
Pure offset: when a Trove's debt is entirely cancelled with MoUSD in the Stability Pool, and all of it's liquidated REEF collateral is assigned to Stability Providers.
Mixed offset and redistribution: When the Stability Pool MoUSD only covers a fraction of the liquidated Trove's debt. This fraction of debt is cancelled with MoUSD in the Stability Pool, and an equal fraction of the Trove's collateral is assigned to depositors. The remaining collateral & debt is redistributed directly to active Troves.
Gas compensation: A refund, in MoUSD and REEF, automatically paid to the caller of a liquidation function, intended to at least cover the gas cost of the transaction. Designed to ensure that liquidators are not dissuaded by potentially high gas costs.
The Mosaic monorepo is based on Yarn's workspaces feature. You might be able to install some of the packages individually with npm, but to make all interdependent packages see each other, you'll need to use Yarn.
In addition, some package scripts require Docker to be installed (Docker Desktop on Windows and Mac, Docker Engine on Linux).
You'll need to install the following:
Git (of course)
Mosaic indirectly depends on some packages with native addons. To make sure these can be built, you'll have to take some additional steps. Refer to the subsection of Installation in node-gyp's README that corresponds to your operating system.
Note: you can skip the manual installation of node-gyp itself (npm install -g node-gyp), but you will need to install its prerequisites to make sure Mosaic can be installed.
There are a number of scripts in the top-level package.json file to ease development, which you can run with yarn.
E.g.:
Supported networks are currently: ropsten, kovan, rinkeby, goerli. The above command will deploy into the default channel (the one that's used by the public dev-frontend). To deploy into the internal channel instead:
You can optionally specify an explicit gas price too:
After a successful deployment, the addresses of the newly deployed contracts will be written to a version-controlled JSON file under packages/lib-ethers/deployments/default.
To publish a new deployment, you must execute the above command for all of the following combinations:
ropsten
default
kovan
default
rinkeby
default
goerli
default
At some point in the future, we will make this process automatic. Once you're done deploying to all the networks, execute the following command:
This copies the contract artifacts to a version controlled area (packages/lib/live) then checks that you really did deploy to all the networks. Next you need to commit and push all changed files. The repo's GitHub workflow will then build a new Docker image of the frontend interfacing with the new addresses.
Starts an openethereum node in a Docker container, running the private development chain, then deploys the contracts to this chain.
You may want to use this before starting the dev-frontend in development mode. To use the newly deployed contracts, switch MetaMask to the built-in "Localhost 8545" network.
Q: How can I get Reef on the local blockchain? A: Import this private key into MetaMask:
0x4d5db4107d237df6a3d58ee5f70ae63d73d7658d4026f2eefd2f204c81682cb7This account has all the Reef you'll ever need.
Once you no longer need the local node, stop it with:
This will start dev-frontend in development mode on http://localhost:3000. The app will automatically be reloaded if you change a source file under packages/dev-frontend.
If you make changes to a different package under packages, it is recommended to rebuild the entire project with yarn prepare in the root directory of the repo. This makes sure that a change in one package doesn't break another.
To stop the dev-frontend running in this mode, bring up the terminal in which you've started the command and press Ctrl+C.
This will automatically start the local blockchain, so you need to make sure that's not already running before you run the following command.
This spawns a modified version of dev-frontend that ignores MetaMask, and directly uses the local blockchain node. Every time the page is reloaded (at http://localhost:3000), a new random account is created with a balance of 100 REEF. Additionally, transactions are automatically signed, so you no longer need to accept wallet confirmations. This lets you play around with Mosaic more freely.
When you no longer need the demo mode, press Ctrl+C in the terminal then run:
This will start a hardhat mainnet forked RPC node at the block number configured in hardhat.config.mainnet-fork.ts, so you need to make sure you're not running a hardhat node on port 8545 already.
You'll need an Alchemy API key to create the fork.
This spawns a modified version of dev-frontend that automatically signs transactions so you don't need to interact with a browser wallet. It directly uses the local forked RPC node.
You may need to wait a minute or so for your fork mainnet provider to load and cache all the blockchain state at your chosen block number. Refresh the page after 5 minutes.
In a freshly cloned & installed monorepo, or if you have only modified code inside the dev-frontend package:
If you have changed something in one or more packages apart from dev-frontend, it's best to use:
This combines the top-level prepare and build scripts.
You'll find the output in packages/dev-frontend/build.
Your custom built frontend can be configured by putting a file named config.json inside the same directory as index.html built in the previous step. The format of this file is:
The quickest way to get a frontend up and running is to use Liquity's prebuilt image available on Docker Hub.
You will need to have Docker installed.
dockerThis will start serving your frontend using HTTP on port 3000. If everything went well, you should be able to open http://localhost:3000/ in your browser. To use a different port, just replace 3000 with your desired port number.
To stop the service:
If you're planning to publicly host a frontend, you might need to pass the Docker container some extra configuration in the form of environment variables.
If you want to receive a share of the MSIC rewards earned by users of your frontend, set this variable to the Ethereum address you want the MSIC to be sent to.
This is an optional parameter. If you'd like your frontend to use Infura's WebSocket endpoint for receiving blockchain events, set this variable to an Infura Project ID.
The kickback rate is the portion of MSIC you pass on to users of your frontend. For example with a kickback rate of 80%, you receive 20% while users get the other 80. Before you can start to receive a share of MSIC rewards, you'll need to set this parameter by making a transaction on-chain.
It is highly recommended that you do this while running a frontend locally, before you start hosting it publicly:
Remember to replace the environment variables in the above example. After executing this command, open http://localhost:3000/ in a browser with MetaMask installed, then switch MetaMask to the account whose address you specified as FRONTEND_TAG to begin setting the kickback rate.
If you are using Gnosis safe, you have to set the kickback rate mannually through contract interaction. On the dashboard of Gnosis safe, click on "New transaction" and pick "Contraction interaction." Then, follow the instructions:
First, set the contract address as 0x66017D22b0f8556afDd19FC67041899Eb65a21bb ;
Second, for method, choose "registerFrontEnd" from the list;
Finally, type in the unit256 Kickbackrate. The kickback rate should be an integer representing an 18-digit decimal. So for a kickback rate of 99% (0.99), the value is: 990000000000000000. The number is 18 digits long.
Now that you've set a kickback rate, you'll need to decide how you want to host your frontend. There are way too many options to list here, so these are going to be just a few examples.
A frontend doesn't require any database or server-side computation, so the easiest way to host it is to use a service that lets you upload a folder of static files (HTML, CSS, JS, etc).
To obtain the files you need to upload, you need to extract them from a frontend Docker container. If you were following the guide for setting a kickback rate and haven't stopped the container yet, then you already have one! Otherwise, you can create it with a command like this (remember to use your own FRONTEND_TAG and INFURA_API_KEY):
While the container is running, use docker cp to extract the frontend's files to a folder of your choosing. For example to extract them to a new folder named "devui" inside the current folder, run:
Upload the contents of this folder to your chosen hosting service (or serve them using your own infrastructure), and you're set!
If you have command line access to a server with Docker installed, hosting a frontend from a Docker container is a viable option.
The frontend Docker container simply serves files using plain HTTP, which is susceptible to man-in-the-middle attacks. Therefore it is highly recommended to wrap it in HTTPS using a reverse proxy. You can find an example docker-compose config here that secures the frontend using SWAG (Secure Web Application Gateway) and uses watchtower for automatically updating the frontend image to the latest version on Docker Hub.
Remember to customize both docker-compose.yml and the site config.
batchLiquidateTroves in Recovery Mode.When liquidating a trove with ICR > 110%, a collateral surplus remains claimable by the borrower. This collateral surplus should be excluded from subsequent TCR calculations, but within the liquidation sequence in batchLiquidateTroves in Recovery Mode, it is not. This results in a slight distortion to the TCR value used at each step of the liquidation sequence going forward. This distortion only persists for the duration the batchLiquidateTroves function call, and the TCR is again calculated correctly after the liquidation sequence ends. In most cases there is no impact at all, and when there is, the effect tends to be minor. The issue is not present at all in Normal Mode.
There is a theoretical and extremely rare case where it incorrectly causes a loss for Stability Depositors instead of a gain. It relies on the stars aligning: the system must be in Recovery Mode, the TCR must be very close to the 150% boundary, a large trove must be liquidated, and the REEF price must drop by >10% at exactly the right moment. No profitable exploit is possible. For more details, please see this security advisory.
When the trove is at one end of the SortedTroves list and adjusted such that its ICR moves further away from its neighbor, findInsertPosition returns unhelpful positional hints, which if used can cause the adjustTrove transaction to run out of gas. This is due to the fact that one of the returned addresses is in fact the address of the trove to move - however, at re-insertion, it has already been removed from the list. As such the insertion logic defaults to 0x0 for that hint address, causing the system to search for the trove starting at the opposite end of the list. A workaround is possible, and this has been corrected in the SDK used by front ends.
Example sequence 1): evade liquidation tx
Depositor sees incoming liquidation tx that would cause them a net loss
Depositor front-runs with withdrawFromSP() to evade the loss
Example sequence 2): evade price drop
Depositor sees incoming price drop tx (or just anticipates one, by reading exchange price data), that would shortly be followed by unprofitable liquidation txs
Depositor front-runs with withdrawFromSP() to evade the loss
Stability Pool depositors expect to make profits from liquidations which are likely to happen at a collateral ratio slightly below 110%, but well above 100%. In rare cases (flash crashes, oracle failures), troves may be liquidated below 100% though, resulting in a net loss for stability depositors. Depositors thus have an incentive to withdraw their deposits if they anticipate liquidations below 100% (note that the exact threshold of such “unprofitable” liquidations will depend on the current Dollar price of MoUSD).
As long the difference between two price feed updates is <10% and price stability is maintained, loss evasion situations should be rare. The percentage changes between two consecutive prices reported by Chainlink’s REEF:USD oracle has only ever come close to 10% a handful of times in the past few years.
In the current implementation, deposit withdrawals are prohibited if and while there are troves with a collateral ratio (ICR) < 110% in the system. This prevents loss evasion by front-running the liquidate transaction as long as there are troves that are liquidatable in normal mode.
This solution is only partially effective since it does not prevent stability depositors from monitoring the REEF price feed and front-running oracle price update transactions that would make troves liquidatable. Given that we expect loss-evasion opportunities to be very rare, we do not expect that a significant fraction of stability depositors would actually apply front-running strategies, which require sophistication and automation. In the unlikely event that large fraction of the depositors withdraw shortly before the liquidation of troves at <100% CR, the redistribution mechanism will still be able to absorb defaults.
Example sequence:
User sees incoming profitable liquidation tx
User front-runs it and immediately makes a deposit with provideToSP()
User earns a profit
Front-runners could deposit funds to the Stability Pool on the fly (instead of keeping their funds in the pool) and make liquidation gains when they see a pending price update or liquidate transaction. They could even borrow the MoUSD using a trove as a flash loan.
Such flash deposit-liquidations would actually be beneficial (in terms of TCR) to system health and prevent redistributions, since the pool can be filled on the spot to liquidate troves anytime, if only for the length of 1 transaction.
Example sequence:* -Attacker sees incoming operation(openLoan(), redeemCollateral(), etc) that would insert a trove to the sorted list -Attacker front-runs with mass openLoan txs -Incoming operation becomes more costly - more traversals needed for insertion
It’s theoretically possible to increase the number of the troves that need to be traversed on-chain. That is, an attacker that sees a pending borrower transaction (or redemption or liquidation transaction) could try to increase the number of traversed troves by introducing additional troves on the way. However, the number of troves that an attacker can inject before the pending transaction gets mined is limited by the amount of spendable gas. Also, the total costs of making the path longer by 1 are significantly higher (gas costs of opening a trove, plus the 0.5% borrowing fee) than the costs of one extra traversal step (simply reading from storage). The attacker also needs significant capital on-hand, since the minimum debt for a trove is 2000 MoUSD.
In case of a redemption, the “last” trove affected by the transaction may end up being only partially redeemed from, which means that its ICR will change so that it needs to be reinserted at a different place in the sorted trove list (note that this is not the case for partial liquidations in recovery mode, which preserve the ICR). A special ICR hint therefore needs to be provided by the transaction sender for that matter, which may become incorrect if another transaction changes the order before the redemption is processed. The protocol gracefully handles this by terminating the redemption sequence at the last fully redeemed trove (see here).
An attacker trying to DoS redemptions could be bypassed by redeeming an amount that exactly corresponds to the debt of the affected trove(s).
Finally, this DoS could be avoided if the initial transaction avoids the public gas auction entirely and is sent direct-to-miner, via (for example) Flashbots.
The content of this readme document (“Readme”) is of purely informational nature. In particular, none of the content of the Readme shall be understood as advice provided by Mosaic AG, any Mosaic Project Team member or other contributor to the Readme, nor does any of these persons warrant the actuality and accuracy of the Readme.
Please read this Disclaimer carefully before accessing, interacting with, or using the Mosaic Protocol software, consisting of the Mosaic Protocol technology stack (in particular its smart contracts) as well as any other Mosaic technology such as e.g., the launch kit for frontend operators (together the “Mosaic Protocol Software”).
While Mosaic AG developed the Mosaic Protocol Software, the Mosaic Protocol Software runs in a fully decentralized and autonomous manner on the Ethereum network. Mosaic AG is not involved in the operation of the Mosaic Protocol Software nor has it any control over transactions made using its smart contracts. Further, Mosaic AG does neither enter into any relationship with users of the Mosaic Protocol Software and/or frontend operators, nor does it operate an own frontend. Any and all functionalities of the Mosaic Protocol Software, including the MoUSD and the MSIC, are of purely technical nature and there is no claim towards any private individual or legal entity in this regard.
LIQUITY AG IS NOT LIABLE TO ANY USER FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, IN CONNECTION WITH THE USE OR INABILITY TO USE THE LIQUITY PROTOCOL SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF REEF, MoUSD OR MSIC, NON-ALLOCATION OF TECHNICAL FEES TO MSIC HOLDERS, LOSS OF DATA, BUSINESS INTERRUPTION, DATA BEING RENDERED INACCURATE OR OTHER LOSSES SUSTAINED BY A USER OR THIRD PARTIES AS A RESULT OF THE LIQUITY PROTOCOL SOFTWARE AND/OR ANY ACTIVITY OF A FRONTEND OPERATOR OR A FAILURE OF THE LIQUITY PROTOCOL SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE).
The Mosaic Protocol Software has been developed and published under the GNU GPL v3 open-source license, which forms an integral part of this disclaimer.
THE LIQUITY PROTOCOL SOFTWARE HAS BEEN PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. THE LIQUITY PROTOCOL SOFTWARE IS HIGHLY EXPERIMENTAL AND ANY REAL REEF AND/OR MoUSD AND/OR MSIC SENT, STAKED OR DEPOSITED TO THE LIQUITY PROTOCOL SOFTWARE ARE AT RISK OF BEING LOST INDEFINITELY, WITHOUT ANY KIND OF CONSIDERATION.
There are no official frontend operators, and the use of any frontend is made by users at their own risk. To assess the trustworthiness of a frontend operator lies in the sole responsibility of the users and must be made carefully.
User is solely responsible for complying with applicable law when interacting (in particular, when using REEF, MoUSD, MSIC or other Token) with the Mosaic Protocol Software whatsoever.
